Effects of silica nanoparticle addition on polymer semiconductor wettability and carrier mobility in solution‐processable organic transistors on hydrophobic substrates

The effects of the addition of silica nanoparticles (SNPs) on wettability of regioregular poly(3‐hexylthiophene) (P3HT) organic semiconductor solutions on hydrophobic substrates and the carrier mobility in organic field‐effect transistors (OFETs) made of these films are investigated. The dewetting of films made from P3HT solutions on hydrophobic substrates modified with octadecyltrichlorosilane (ODTS) is markedly suppressed after the addition of SNPs with phenyl surfactants. This enables us to fabricate continuous P3HT/SNPs films with high crystallinity by the conventional spin‐coating technique, leading to higher mobility compared with P3HT FETs fabricated on non‐modified substrates. Moreover, the addition of SNPs with larger diameters compensates for the degradation of mobility associated with the increase in the concentration of SNPs. Solution‐processed P3HT/SNPs FETs on ODTS‐modified substrates exhibit a field‐effect mobility of 1.3 × 10^?2 cm² V^?1 s^?1, which is almost comparable to that of P3HT FETs without SNPs (2.1 × 10^?2 cm² V^?1 s^?1). © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 509–516     

Above,below, and in‐between the two glass transitions of ultrathin free‐standing polystyrene films: Thermal expansion coefficient and physical aging

In previous work we observed two simultaneous transitions in high molecular weight (MW) free‐standing polystyrene films that were interpreted as two thickness‐dependent reduced glass transition temperatures (T_gs). The weaker lower transition agreed well with the MW‐dependent T_g(h) previously reported, while the much stronger upper transition matched the MW‐independent T_g(h) previously observed in low‐MW free‐standing films. Here, we investigate the nature of these two transitions by inspecting the temperature dependence of the films' thermal coefficient of expansion (TCE) and present physical aging measurements using ellipsometry both below and in‐between the two transitions. TCE values indicate approximately 80 to 90% of the film solidifies at the upper transition, while only 10 to 20% remains mobile to lower temperatures, freezing out at the lower transition. Physical aging is observed at a temperature below the upper transition, but above the lower transition, indicative of the upper transition being an actual glass transition associated with the α‐relaxation. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 64–75     

Phonon-mediated heat dissipation in a monatomic lattice: case study on Ni

The recently introduced analytical model for the heat current autocorrelation function of a crystal with a monatomic lattice [Evteev et al., Phil. Mag. 94 (2014) p. 731 and 94 (2014) p. 3992] is employed in conjunction with the Green–Kubo formalism to investigate in detail the results of an equilibrium molecular dynamics calculations of the temperature dependence of the lattice thermal conductivity and phonon dynamics in f.c.c. Ni. Only the contribution to the lattice thermal conductivity determined by the phonon–phonon scattering processes is considered, while the contribution due to phonon–electron scattering processes is intentionally ignored. Nonetheless, during comparison of our data with experiment an estimation of the second contribution is made. Furthermore, by comparing the results obtained for f.c.c. Ni model to those for other models of elemental crystals with the f.c.c. lattice, we give an estimation of the scaling relations of the lattice thermal conductivity with other lattice properties such as the coefficient of thermal expansion and the bulk modulus. Moreover, within the framework of linear response theory and the fluctuation-dissipation theorem, we extend our analysis in this paper into the frequency domain to predict the power spectra of equilibrium fluctuations associated with the phonon-mediated heat dissipation in a monatomic lattice. The practical importance of the analytical treatment lies in the fact that it has the potential to be used in the future to efficiently decode the generic information on the lattice thermal conductivity and phonon dynamics from a power spectrum of the acoustic excitations in a monatomic crystal measured by a spectroscopic technique in the frequency range of about 1–20 THz.     

Generic applications of 13C‐detected NMR diffusion to formulated systems with suppression of thermal convection induced by proton decoupling

Fast and effective structural/compositional analysis on formulated systems represents one of the major challenges encountered in analytical science. ¹³C‐detected diffusion represents a promising tool to tackle the aforementioned challenges, particularly in industry. Toward exploring the generic applications of ¹³C‐detected diffusion, thermal convection induced by ¹H decoupling has been identified as a key factor that resulted in significantly reduced resolution in the diffusion dimension. Optimization of experimental parameters and utilization of double‐stimulated echo‐based pulse sequence both can effectively suppress the thermal convection caused by the ¹H decoupling, the success of which allows robust and generic applications of ¹³C‐detected diffusion to systems from mixtures of small molecules, polymer blends, and copolymers to actual complex formulated systems. The method is particularly powerful in differentiating small molecules from polymers, polymer blends from copolymers, and end‐group analysis. Copyright © 2016 John Wiley & Sons, Ltd.     

Synthesis and physical properties of highly branched perfluorinated polymers from AB and AB2 monomers

Highly branched perfluorinated aromatic polyether copolymers were prepared from the polycondensation of the AB₂ monomer, 3,5‐bis[(pentafluorobenzyl)oxy]benzyl alcohol with a variety of fluoroaryl and alkyl bromide AB comonomers. The structures and comonomer distribution of the resulting polymers were characterized in detail. ¹H NMR data from kinetic trials illustrated that perfluoroaryl AB comonomer distribution correlated to AB comonomer sterics. ¹⁹F NMR data revealed that fluorinated AB monomers and 3‐bromo‐1‐propanol AB monomers were distributed within the AB₂ polymer backbone, while longer alkyl bromide AB monomers, 6‐bromo‐1‐hexanol, were mostly distributed along hyperbranched polymer chain ends. In general, as AB comonomer incorporation increased for nonsterically hindered copolymers, thermal decomposition onset increased and glass transition temperatures decreased. The combined data demonstrated the effect of comonomer distribution and sterics on physical properties of AB₂‐based polymer systems. The resulting materials were used to cast thin polymer films for measurement of contact angle, which were shown to be directly related to comonomer content. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1880–1894     

基于拉曼热测量技术的铜基复合物法兰GaN基晶体管的热阻分析

采用拉曼热测量技术结合有限元热仿真模型,分析比较新型铜/石墨复合物法兰封装与传统铜钼法兰封装的GaN器件的结温与热阻,发现前者的整体热阻比铜钼法兰器件的整体热阻低18.7%,器件内部各层材料的温度分布显示铜/石墨复合物法兰在器件中的热阻占比相比铜钼法兰在器件中的热阻占比低13%,这证明使用高热导率铜/石墨复合物法兰封装提高GaN器件热扩散性能的有效性.通过对两种GaN器件热阻占比的测量与分析,发现除了封装法兰以外,热阻占比最高的是GaN外延与衬底材料之间的界面热阻,降低界面热阻是进一步提高器件热性能的关键.同时,详细阐述了使用拉曼光热技术测量GaN器件结温和热阻的原理和过程,展示了拉曼光热技术作为一种GaN器件热特性表征方法的有效性.     

Hyperbranched Kaustamin as an antibacterial for surface treatment

Hyperbranched Kaustamin as a commercially available cationic flocculant adsorbs on a glass surface with formation of the polymer film. Kaustamin has antimicrobial effect on Gram-negative and Gram-positive bacteria, its film on glass keeps integrity and shape after absorption of water from air, which make the polymer appropriate as an antibacterial cover.     

二维CdO的低晶格热导率研究

寻求具有较小晶格热导率k_lat的高热电性能的二维材料具有重要意义。基于从头计算和声子玻耳兹曼输运理论,该研究首先对二维CdO结构进行优化,并通过计算声子谱验证了单层CdO的动力学稳定性。在此基础上详细研究了单层CdO的声子输运性质。计算表明在室温下单层CdO的晶格热导率k_lat约为5.7 W/(m·K),低于单层石墨烯、磷烯、黑磷和MoS₂等二维材料的晶格热导率。其中,Z方向声学模式(Z-direction acoustic, ZA),横声学支(transverse acoustic,TA),纵声学支(longitudinal acoustic, LA),Z方向光学模式(Z-direction optical, ZO),横光学支(transverse optical, TO),纵光学支(longitudinal optical, LO)对k_lat的百分比贡献分别为73.7％、13.9％、3.7％、2.8％、4.7％和1.2％。研究发现,ZA、TA、LA声学支和光学支之间的强散射是导致单层CdO低热导率的原因。本文计算结果可用于指导基于CdO的低维热电器件的设计。